Features
Baluoqi Extension Waterproof Electric Throttle features is:
- ★ Wire Model: 2pin/3pin/4pin/5pin/6pin/7Pin/8Pin/9Pin extension cable for electric bike kit
- ★ Connection: 2/3/4/5/6/7/8/9 Pin plug, Female to Male
- ★ Length: 80cm/150cm (including connectors) ; waterproof connector
- ★ Universal Compatiblity: Extend your throttle, electric bike motor, brakes, brake sensors,gear sensor and display cable
- ★ Warranty: high quality, 2 year warranty ,100% refund or replacement if there is any quality problem
Reviews
Below are some critical reviews about Baluoqi Extension Waterproof Electric ThrottleObviously stupid me for reading the description and description saying while believing that it works with all ebike motors. But does not I repeat does not work properly BBShD you can make the connections but there is a 4 to 5 second delay from throttle return after breaking it was killing me for almost 2 weeks not knowing what was up so I decided to get rid of them got new ones low and behold it works perfectly so they do not work properly there is a 4 second delay on throttle after braking these are 100% crap
The green 5 pin connector doesn't fit with the stock line on one end or the KT-LCD8H display cable on the other end. I removed the sheath from the cable and it still does not insert far enough to connect. It connects to itself fine, but the green plastic seems ill fitted for the receivers on the other cables.I ordered the same cable from Bafang 2 weeks ago. If it arrives and has the same issue, I'll update this post.The brake and throttle cable extensions fit and are working fine. Only the 5 pin fails to connect.
these do not make good connection on the female side, and work intermittently
Below are some positive reviews about Baluoqi Extension Waterproof Electric Throttle
I bought an aftermarket rear rack for my new Evelo e-bike as the manufacturer's was on backorder for months. That covered the existing brake light attached under the seat. So, I extended the cable coming out of the frame with this little red cable to the back of the rack where it would face traffic. Did any drivers or crossing pedestrians look up from their phone to notice? Who knows. But it's better than having the brake light buried!The Evelo rack has now come and has its own brake light. If this company sells a y-cable, I may re-use the other one mounted higher up. See and be seen! BTW this and any other cable will work on any Canbus-based e-bike. You simply match the color and number of pins on the connector.
Transporting my bike on a bus, combined with it falling over from a collapsing kick stand (grrrr!!!!), stripped this cable, which enables you to operate your display/battery assist. Ride1UP doesn't provide replacement cables, incredulously, so you're on your own! Why?To install, I essentially had to do a bypass, because once removed from the tube, it's virtually impossible to needle the cable through the many metal barriers inside the tube, and so I ran it on the outside, then taped it over to protect it from the elements.Now that it's successfully installed, I'd argue it performs even better than the original cable! The performance is exceptional!I'm deeply appreciative this cable is available on Amazon, because e-bike stores and bike shops informed they don't carry this cable. Not even Ride1UP provides it! (What?!?)If I get another e-bike, it's going to be one where I can get the replacement components locally.
perfect and precisely what I needed.
